Septic Tank Maintenance

Septic Sense: Maintaining the Motions

Septic Tank MaintenanceOne of the finer aspects of society living is public plumbing: Once you flush, it goes away. But with more than 20 percent of households relying on an onsite system to treat their wastewater, you may have found yourself with a septic tank to maintain. Don’t panic: While repairs can be costly, septic systems typically have a 30-year life expectancy with proper maintenance.

First Things First

A little bit about your septic system: It consists of a large underground tank and a drain field. The tank is designed to handle the solid matter, while the treated waste water escapes into the drain field through a filter.

Your maintenance goals, should you accept them, are to:
  • Prevent excessive solid waste accumulation in the tank, and
  • Prevent groundwater contamination.

Ew, right? Relax, you won’t be digging around in… ick. It’s mostly just having it serviced regularly, using a ‘good’ bacteria additive, and some good old-fashioned common sense. Check out this article, ‘Your Guide to Septic Tank Maintenance’ on Moving.com*, for an easy read that explains what to do and how to do it, along with suggestions to help extend the life of your tank.

So let’s roll up our pantlegs (kidding!) and get to work enjoying our modern plumbing!

For more information on Septic Tank warranty coverage, visit APHW.com or call us anytime at 1.800.648.5006.

*America’s Preferred Home Warranty is not affiliated with and has not collaborated with Moving.com in any capacity.

Furnace Maintenance for New Homeowners

Need-to-Know Furnace Maintenance for New Homeowners

Furnace Maintenance for New Homeowners

Turn up the heat! Well, check your furnace first—but then turn up the heat!

When outside temperatures start to drop, it’s important to ensure you’re covering the basics of furnace maintenance. This will help you in a number of ways, including extending the life of your furnace—that is one expensive system to replace!

Have You Got That ‘Filter’ Feelin’?

Imagine wearing a cotton surgical mask. Much like that mask is filtering your breath as you exhale, the filter in your furnace is there to prevent dust and debris from being pulled into your furnace (and back into the air you’re breathing). That debris builds up over time, making your furnace work harder to pull air through it, which increases your electric bill and wears down the system itself. Changing the filters every other month, maybe even monthly if you have pets or children, allows the air to flow easily and helps keep your machine running smoothly.

Cleaning & Professional Inspections

Think of it this way: The less dust there is on your furnace, the less there is to clog your filter. Dusting the outside of your furnace is a must on a fairly regular basis (at least once every few months). In a lot of cases, this can be done with a can of compressed air or a damp cloth. That said, hire a professional HVAC contractor to conduct a tune up (and clean inside your furnace) in the spring and fall. A professional inspection can make a big difference, as licensed contractors are much more likely to catch an issue before it becomes a real (and more expensive) problem.

Look & Listen

The color of your pilot light indicates whether it’s burning at the correct ratio. Check on it occasionally to verify it’s burning at a steady blue. Any other color could be dangerous (an excess of carbon monoxide, for example), and you may want to consider hiring a licensed contractor to inspect it. Listen to your furnace as well. You are around it the most, and you know what sounds it typically makes. If it makes sounds you’re not used to, give that licensed contractor a call.

Another way to maximize your furnace’s efficiency is to clean your main living area vents from time to time. Take off and clean the covers, and vacuum inside the vents. Remember, any dust in there is dust you’re regularly breathing in.

Happy heating season! Check out our blog at https://aphw.com/blog/ for more household tips and tricks!

Plumbing Tips

Need-to-Know Plumbing Tips for New Homeowners

Plumbing Tips

When your toilet is overflowing, or a pipe is leaking (a LOT), wouldn’t it be nice to know how to stop the onslaught of water? Read on to learn this and other essential tips about household plumbing.

Shut It ALL Off

Do you know where your main shut off valve is? In the event of an emergency, shutting it off will stop the water flow to your entire home. Make sure you and your family members know where the main shutoff valve is, and how to turn it off, because even a half-inch of standing water can cause structural damage. If you know nothing else about plumbing, this will at least prevent further flood damage until a plumber can get there. It’s also your first step for major plumbing repairs.

Main shutoff valves can be found in a couple of places, depending on your home, its location, and your water source. Yours may have a handle you can manually turn clockwise to shut off, or you may have a bolt, which will need a wrench or other tool to grip and turn. If you aren’t able to locate the main shutoff yourself, take a look at your property inspection report; it should include the location and a photo. If you find you need a tool for the job, your local hardware store can help. Keep the tool near that main shutoff valve—just in case.

Keep It Localized

Household water supply sources (sinks, toilets, washing machines, etc.) typically have shutoff valves very close to where the water comes out, allowing you to stop the water flow in one place without stopping your entire home’s water supply (handy if someone is taking a shower but your leak is by the washing machine). When you first move in, go through the house and locate all of these valves. They will typically have brightly colored handles made out of plastic or chrome, located on the exposed piping leading to the source. Turn the handles clockwise to shut off the immediate water supply in the event of a leak or overflow.

Avoid blocking these valves with furniture or accessories, which can delay access when you need it most. You may want to invest in a set of slip-joint pliers as well, to make shutting these valves easier as handles can sometimes be in difficult locations to reach and turn.

Defend Your Pipes!

Whether it’s food in your kitchen sink or hair in the bathtub drain, most people immediately reach for the drain cleaner—but you may want to consider an alternative. Drain cleaner is highly caustic and can wear away your pipes over time, particularly if you experience clogs often.

Pour baking soda down the drain and follow it up with vinegar. This combination creates a substance that eats away at only organic matter and is much kinder to your pipes. Finish it off by pouring boiling water down the drain. Use drain cleaner only as a last resort, and be sure to follow the instructions to avoid unnecessary damage.

There’s still plenty to learn about plumbing, but if you know at least these things, you can save yourself a lot of hassle, and a LOT of money.

Check back soon for more homeowner tips!

 

A Dusting Conundrum: Ceiling Fans

Ceiling fans — can’t live without ‘em, don’t want to clean them. They should just spin off any dust on them anyway… right?

Sad to say, ceiling fans are not self-cleaning. I don’t know about you, but I don’t spend much time looking upward, so they tend to get cleaned when a dust bunny hits me in the forehead. That’s when you get out a wet paper towel, give it a quick wipe and you’re done… right? Wrong.

Shoving dust off of your ceiling fan’s blades all willy-nilly will likely leave them unbalanced, and we all know how annoying an unbalanced fan is—creaking, clicking or whining as it spins. So here are some better options to choose from.

    • For light dust, use your vacuum’s brush attachment and gently run it over the top and bottom of each blade (yes, there’s dust underneath too).
    • Heavier dust bunnies need a little more heft. Start with step one, then fold a damp cloth (microfiber is best, but any soft cloth will typically do) over one side of a blade, and slowly pull it from one end to the other, applying equal pressure on the top and bottom of the blade to avoid warping. Rinse your cloth and repeat on the other side, and for the remaining blades.

No matter what method you use, DO NOT use heavy cleaners like bleach, as they will likely strip away the finish and cause warping. Also avoid any form of one-sided pressure on the blades from any direction.

Now that you know how to clean those fan blades, you’ll keep them sparkling, right?

(What? Dust bunnies can be cute…)

Call 888.351.3681 or visit APHW.COM today for more information about our home warranty!

Let us know your thoughts on Facebook, LinkedIn, Twitter or Instagram!